범용 사업부 >
SLOTTER MACHINE
KTM-210
- 슬라이드(랩)가 열처리 및 연마로 내마모성이 우수합니다.
- 테이블이 고정형이므로 하중에 견고합니다.
- Index(분할판)이 부착되어 공작물의 분할이 용이합니다.
- Stroke 조정이 가능하여 작업이 용이합니다.
- 수동버튼 사용으로 공작물 Setting이 용이합니다.
- 기어감속으로 강력한 Power를 지닙니다.
- 유압장착으로 바이트 도피장치가 있습니다.
- 인버터 Control 방식으로 작동중에도 속도조정이 가능합니다.
- Slider(Lap) is excellent in wear-resistance by the heat treatment and grinding.
- This is strong against the load because the table is fixed type.
- INDEX(separation plate) is attached and it is possible to separate the workpiece.
- Operation is easy because the stroke is adjustable.
- Workpiece setting is easy by using manual buttons.
- The power is high by using reduction gears.
- Bite escaping equipment by hydraulic power is attached.
- Speed control is available as the inverter control type
주의 (ATTENTION)
- 벨트가 느슨해졌을 시에는 커버를 풀고 벨트 누름장치를 사용
- 전기는 220V 3상 사용 380V일 경우 모터선 변경과 마그네트 사용
- 회전방향 표시를 확인
- When the belt is elongated, open the cover and use the belt pressing equipment.
- Use 220V 3-phase power Change the motor lines and use the magnet
- Certify the rotating direction.
최대행정 |
Maximum stroke |
210mm |
행정 속도 범위 |
Range of stroke speed |
0-60SPM˚ |
테이블의 직경 |
Diameter of table |
Ø∮400mm |
테이블 중심과 칼럼의 거리 |
ram guide to table surface |
460mm |
공구대와 칼럼의 거리 |
Tool post face to column |
380 mm |
설치면적 |
Floor space |
1200×1500×2000mm |
중량 |
Net weight |
1450kg |
주모터 |
Main motor |
1.5(2)Kw(HP) |
공구홀터 최대직경 |
Max. tool shank size |
∮35mm |
외형도 (Dimension)