HOBBING M/C 사업부 >
■ 자동 사이클 기어 호빙 머신
본 모델은 정밀 기어, 스프라켓, 스플라인축, 웜휠 및 기타 톱니 프로파일의 계수 생산을 위해 설계되었습니다.
거친 절삭, 마감, 동일 종류의 한 개 또는 수 천 개의 기어이든지 간에 귀사의 알맞은 호빙 머신을 구비하고 있습니다.
This model precision gear, sprocket, spline shaft, designed for the production of worm wheel and the other tooth profile factor.
Rough cutting, finishing, and equipped with your appropriate hobbing machines, whether one or thousands of the same type gear.
자동 호빙 사이클
자동 호빙 사이클은 기계를 고생산성의 요구조건에 가장 적합하게 합니다.차동기어
각 머신은 최대 45。까지 나선 각을 절삭하기 위해 차동 기어를 구비하고 있습니다.단단한 기계 프레임 열처리 및 연마된 안내홈
다수의 뼈대에 의해 강화된 튼튼한 기계 프레임은 중량물 절삭 동안 필요한 강성을 제공합니다.듀얼 리드 웜기어
작업 테이블은 백래쉬를 최소화하기 위해 열처리, 연마된 듀얼 리드 웜에 의해 구동됩니다.강력한 호브 헤드
단단한 상자형 호브의 헤드는 기름 용기 윤활제와 함께 열처리되고 정밀하게 연마된 헤드 기어 및 피니언을 수용합니다.손쉬운 운전
기계 제어는 작업자가 제어를 하면서 절삭 공정을 가까이 볼 수 있도록 편리하게 배치됩니다.Automatic hobbing cycle
The automatic hobbing cycle makes the machine most suitable for the requirements of high production.Differential gear
Each machine has a differential to cut helix angles of up to 45 degrees.Rigid Machine Frame-Hardened and Ground Guideways
The sturdy machine frame, reinforced by numerous ribs, provides the necessary rigidity during heavy cuts.Dual-lead worm gear
The worktable is driven by a hardened and fround dual lead worm to minimize acklash.Powerful hob head
The rigid box type hob head houses the hardened and precision ground head gear and pinion with its oil bath lubrication.Easy Operation
The machine controls are conveniently arranged in a way to allow the operator to closely watch the cutting process while handling the controls.호빙 용량, 지지대 없을 때 최대 직경 | Hobbing capacity, Max. diameter without support | Φ800mm(31 1/2″) |
---|---|---|
호빙 용량, 지지대 있을 때 최대 직경 | Hobbing capacity, Max. diameter with support | Φ530mm(20 7/8″) |
호빙 용량, 최대 피치 | Hobbing capacity ,Max. pitch | Module 8(D.P 3.2) |
호브 새들의 최대 이송거리 | Max. travel of hob saddle | 330mm(13″) |
테이블 직경 | Diameter of table | Φ535mm(21″) |
호브의 최대 직경 | Max. diameter of hob | Φ130mm(5 1/8″) |
호브의 최대 길이 | •Max. length of hob | 170mm(6 3/4″) |
호브 속도 범위 | Hob speed ranges | 30-225r.p.m |
주 모터 | Main motor | 5.5kW(7.5HP) |
보조 모터 | Auxiliary motor | 1.5kW(2HP) |
바닥 공간 | Floor space | 3,400×2,300mm(133 7/8″×90 1/2″) |
기계 높이 | Machine height | 2,300mm(90 1/2″) |
순중량 | Net weight | 6,800kg(14,991lbs) |